Dental milling machine CORiTEC 350i
Ultimate all-in-one dental milling machine.
With the CORiTEC 350i processing system, a novel machine concept has been developed which meets all modern requirements for CAD/CAM processing. The processing of all relevant blank materials from CoCr, titanium, zirconium dioxide, plastics, block materials, and new future materials is thus possible with a single machine system, virtually without restrictions.
Dental Milling Machine CORiTEC 350i
Ultimate all-in-one dental milling machine.
With the CORiTEC 350i dental milling machine, a new machine concept has been developed. It meets all modern requirements for CAD / CAM processing. The processing of all relevant dental materials from CoCr, titanium, zirconium dioxide, plastics, block materials and new future materials is largely possible without restrictions on a single machine system.
The modern and optimized machine kinematics with the high angles of free movement of the 5 axes of over 30 ° allow high quality of dry and wet processing of milling and grinding. This makes the system ideal for demands and requirements of dental labs.
The optional zero-point clamping system allows a simple blank change at the push of a button.
Technical highlights
5-axis simultaneous processing
Integrated wet and dry processing
Optional zero point clamping system
Processing of all important materials used in the dental industry, including metalworking
Axis tilt angle up to 30°
20-fold tool changer
HF spindle with up to 60,000 rpm
Integrated control PC with touch screen
Servomotors on all axes
Chip protection of the tool changer
Frontal machining of the work-piece possible
(B-axis in 90 degree position)
Technical specifications of Dental milling machine CORiTEC 350i
| Number of axles and machining type | 5 axes, simultaneous machining |
| Tilt angle for machining with 98mm blank | A-axis /- 30° / B-axis /- 25° |
| Wet processing | Integrated |
| Spindle max. / Pmax~ | 60,000 rpm / 1 kW |
| Axle drives | Servomotors |
| Tool fitting | 6 mm shaft |
| Tool changer | 20-fold with chip protection cover |
| Workpiece changer | Manual / optional: with zero-point clamping system by pressing a button |
| Weight | 180 kg / 396.90 Ibs |
| width x depth x height | 758 x 790 x 857 mm / 29.8 x 31.1 x 33.7 inch |
| Mains voltage / frequency / power | 100V-240 V / 50/60 Hz / 2200 W |
| Compressed air supply | 95 – 130 PSI (6.5 – 9 bar) constantly supply, 2.9 cf/min (80 l/min) |
| Materials | CoCr/NEM, titanium, zirconium dioxide, aluminum oxide, |
| PMMA, plastics, composites, wax, glass ceramics, hybrid ceramics | |
| Compatibility | 98 mm/98.5 mm blanks, CAD/CAM blocks, nt-Trading pre-milled abutments, Medentika, Baltic Denture, PreFace®abutments, Lava frames |
For additional information about Dental milling machine CORiTEC 350i you could contact the manufacturer using the following link:imes-icore® GmbH
| Weight | 180 lbs |
|---|---|
| Dimensions | 75.8 × 79.0 × 85.7 in |
| Machine-size | Medium |
Brand
Imes-Icore
PHILOSOPHY
„DEVELOPMENT, PRODUCTION, SALES AND SERVICE IN GERMANY“
Benefit from our know-how
Related products
Dental Milling Machines
Imes-Icore CNC machines
Dental Milling Machines
Suction Units
Imes-Icore CNC machines
Dental Milling Machines
Dental Milling Machines
Dental Milling Machines